|
|
Easily Record Inspection Measurements
Cordless Plus Remote Indicator
A |
Summary/Transmit Button
Press the summary button once to transmit stored values to the alignment console.
^ Back to Top |
 |
B |
Tire Temperature Button
The standard tire temperature probe is used to measure the tire surface (inboard, mid and outboard) temperature.
^ Back to Top |
 |
C |
Tire Pressure Button
Tire pressure can be measured using any air pressure measuring device. The results can then be entered into the remote and sent electronically to the alignment console.
^ Back to Top |
 |
D |
Tire Tread Depth Button
Tread depth can be measured using any depth measuring device.
The results can then be entered into the remote and sent electronically to the alignment console.
^ Back to Top
|
 |
E |
Frame Angle Button
Frame angle can be measured directly with the remote indicator.
^ Back to Top |
 |
F |
Ride Height Button
Ride height can be measured using any ride height measuring device. The results can then be entered into the remote and sent electronically to the alignment console.
^ Back to Top |
 |
G |
Measurement Input Wheel
^ Back to Top |
|
| |
|
|
1 |
Alignment Tolerance Indicator
Displays the amount and direction of adjustment required. Indicator changes from red to green as the adjustment comes within specifications.
^ Back to Top
|
2 |
Alignment Value Display
Displays reading in degrees, degrees/minutes, millimeters or inches.
^ Back to Top
|
3 |
Alignment Measurement Selections
Quick access keys have indicator lights to show which measurement is currently displayed.
^ Back to Top
|
4 |
Axle/Wheel Indicators
Indicates the location of the displayed alignment values.
^ Back to Top
|
5 |
Axle/Wheel Selection Buttons
Choose the wheel or axle you wish to display by pressing the wrench button next to the desired vehicle location.
^ Back to Top
|
6 |
K1 through K4 Softkeys
^ Back to Top
|
7 |
“Zoom” Softkey
This feature allows a WinAlign®-equipped aligner to display a zoomed version of the current softkey labels for easier reading.
^ Back to Top
|
8 |
Battery Level Indicator
^ Back to Top
|
Exclusive Features for Ease of Use
9 |
Rear Hooks |
12 |
Cable Connector |
10 |
Battery Compartment |
13 |
Battery Charge Indicator |
11 |
Charging Terminals |
14 |
Power Indicator |
|
|
15 |
Power Button |
|
|
16 |
Tire Temperature Probe Connector
(Plus models only) |
| |
 |
|
The remote indicator’s rear hooks allow for convenient and secure placement on Hunter lift jack rails. |
Plus Icon Remote Indicator Ordering Information and Specifications
For use with Series 811 Alignment Consoles using WinAlign® Alignment
Software version 9.0 and greater.
Model 30-418-1 includes:
- 30-418-1 Plus Remote Indicator*
- 20-2056-1 Remote Hanger with Recharge
- 27-13-2 Tire Temperature Probe
- 38-944-3 30 Foot Cable
|
Dimensions:
- Length 12-1/2" (318 mm)
- Height 7" (178 mm)
- Depth 4-1/4" (108mm)
Weight:
|
*Cordless communication requires 20-2072-1 XF Pod
New style XF Pods are shipping with DSP506/508XF Sensors after June 15, 2006
|
|
|
