FasterCaster®

Main

Measuring Caster And S.A.I./I.A. Simultaneously (FasterCaster®)

FasterCaster uses a single bar graph indicator instead using both a left and right bar graph indicators. Press “Measure Caster” on the “Vehicle Measurements and Adjustments” primary screen. The “Caster and S.A.I. Measurement” popup screen will appear. If measuring “FasterCaster (Caster and S.A.I./I.A.)” is not the default:

1. Press “Select Measurement,” the “Caster Measurement Selection” popup screen will appear.

2. Press the up arrow or the down arrow until “FasterCaster (Caster and S.A.I./I.A.)” is highlighted.

Press “OK” to select the measurement. The “Caster and S.A.I. Measurement” popup screen will appear.

NOTE: This selection will not change the aligner default setting. When the aligner is reset, the default settings will be applied.

Lock the front brakes using a brake pedal depressor.
Steer wheels straight ahead.
Level and lock the sensors.
Press “Ready”

The aligner will save the measurements and the display will change to show a bar graph and prompt to steer left.

The single left bar graph indicator is controlled by the left wheel. Observing the bar graph display, steer the wheels to the left until the wheel position indicator is within the center valley of its bar graph. Hold the steering wheel steady until the bar graph disappears.

A single right bar graph will appear and the steering wheel display will indicate to steer to the right.

Observing the bar graph display, steer the wheels to the right until the wheel position indicator is within the center valley of its bar graph. Hold the steering wheel steady until the bar graph disappears.

A single bar graph will appear.

Steer the wheels straight ahead until wheel position indicator is within the center valley of the bar graph.

When the caster and S.A.I. measurements are completed, the screen will change to the “Vehicle Measurements and Adjustments” primary screen with the caster, S.A.I., and included angle measurements shown.

Ordering Information

For pricing and ordering information on Alignment System Software or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

WHAT'S NEXT?