Provides A Quick Screening To Determine If Vehicle Is Alignable, Identifies Need For Collision Repair Procedures. |
||
|
SBDA is a standard feature of WinAlign® Software. SBDA requires DSP306, DSP308, DSP506 or DSP508 Sensors and the Electronic Ride Height Measurement* option. RangeFinder® Feature: Ride height and body offset measurements are taken using a special tool. The RangeFinder® feature then calculates track width and wheelbase (up to 210”). Ride height is also calculated and the results are displayed. |
 |
|
|
The Procedure:
The Results:
Measurements from the sensors are displayed on an easy-to-understand display.
Excessive body angle, body wheel offset and body wheel set back can easily be identified. This can indicate the need for body work prior to aligning the wheels. Ride height measurements are used for a 3-dimensional display showing front and rear body roll. |
|
WinAlign® software upgrades may require additional and/or upgraded hardware. Because of continuing technological advancements, specifications, models and options are subject to change without notice. RangeFinder and WinAlign are marks of Hunter Engineering Company. International models and configurations may differ in product content or standard equipment. * Patented Feature Ordering Information
For pricing and ordering
information on Alignment System Software or other
Hunter products, contact your local Hunter representative. See the
representative locator
or contact Hunter Engineering
Company. To receive a quote on this equipment, go to Get-A-Quote. |
||
