|
|
|
20-1839-1 Adjustable Flange Plate and Stud Kit
The preferred recommendation when choosing a flange plate kit for maximum application coverage. Single-plate sliding bolt circle design with interchangeable pins provides quick setup and universal fitment. The kit adapts to 3-, 4-, 5-, 6-, 7- and 8-lug bolt circles with infinite adjustability. Fits future vehicle bolt circles that have yet to be released.
The maximum bolt circle diameter is 6.70" (170 mm) and minimum diameter is 3.85" (98 mm). The kit contains much fewer pieces and is more economical than multiple flange plate kits. All pins use compressible studs allowing more accurate centering when clamping on uneven wheel lug seat surfaces. This mounting method is the most accurate of all choices.
Kit Includes:
A. 175-355-1 Adjustable Flange Plate with Locking Knob
B. 106-143-2 Conical End Pin Sleeve (7), 1" diameter, 2.00" long
(Shown with 135-378-1 Pin Assemblies (7)), 1.00" long
C. 106-145-2 Conical End Pin Sleeve (5), 3/4" diameter, 2.50" long
D. 106-144-2 Spherical End Pin Sleeve (5), 7/8" diameter, 2.00" long
E. 67-676-1 Pin Storage Rack (Not shown - pictured with 20-1879-1 on page 10)
Optional Pin End Kits
20-2110-1 Pin End Kit - Long 3/4" O.D., set of five pins (106-150-2) used with adjustable flange plate (not included in 20-1839-1). Depending on wheel offset and width, these pins may only be compatible when used with the GSP/DSP9200 series wheel balancers. 3.25" long
20-2111-1 Pin End Kit - Spherical End, set of five pins (106-149-2) used with adjustable flange plate (not included in 20-1839-1). Depending on wheel offset and width, these pins may only be compatible when used with the GSP/DSP9200 series wheel balancers. 3.25" long |
|
|
|
20-2123-2 Fixed Flange Plates and Stud Kit
Wheel bolt circles are defined in a fixed flange plate kit. Kit consists of 4 flange plates in 4-, 5-, 6-, 7- and 8-lug bolt circles with three sets of added plug-in studs. No storage provided.
Kit Includes:
A. 175-385-2† Bolt patterns include 4 x 3.75", 4 x 98mm, 4 x 100mm, 4 x 4.00", 4 x 108mm, 4 x 4.50", 7 x 150mm and 8 (4) x 170mm.
B. 175-386-2† Bolt patterns include 5 x 98mm, 5 x 108mm, 5 x 110mm, 5 x 115mm, 5 x 4.75", 5 x 135mm and 6 (3) x 6.10".
C. 175-387-2† Bolt patterns include 5 x 100mm, 5 x 112mm, 5 x 4.50",5 x 120mm, 5 x 5.00", 5 x 127mm, 5 x 130mm, 5 x 5.50", 5 x 150mm and 5 x 6.50"
D. 175-388-2† Bolt patterns include 6 (3) x 98mm, 6 (3) x 112mm, 6 (3) x 4.50", 6 (3) x 115mm, 6 (3) x 5.00", 6 (3) x 127mm, 6 (3) x 135mm, 6 (3) x 5.50" and 8 (4) x 6.50".
E.175-389-2 Stud II Plug in - 80mm with tapered head.
F.175-390-2Stud III Plug in - 90mm with round head.
G.175-391-2Stud V Plug in - 100mm with tapered head.
20-2124-2 Trolley for Flange Plate Storage
(Flange plates and studs shown are not included with trolley)
† Does not include plug-in stud kits. Part numbers for identification only not available individually. |
