|
The low-taper of a direct-fit, dual-taper collet (versus the high-taper cone) offers better hub bore contact and prevents bottoming out on recently popular outer hubcap alloy wheel bore designs.
|
|
The Advantage of Using Direct-Fit Collets
Precise wheel balancing relies on two critical conditions, (A) accurate center mounting and (B) distortion-free clamping while providing cosmetic wheel protection. To accurately mount a wheel, the center of the wheel must first be properly located on the balancer shaft. Contrary to popular belief, hub-centric and lug-centric wheels all use the hub bore as the center locating position of the wheel. The hub bore centerline is virtually the same as the lug holes.
Traditional high-taper, deep-depth cones often fail to fit properly within the bore of the wheel. The actual bore of the wheel (not the bore chamfer) is where centering takes place when the wheel is mounted on a vehicle. Many modern aluminum wheel designs cannot be properly mounted with traditional cones.
|
|
Take Your Wheel Balancing Accuracy to the Next Level With HunterPro…
20-1847-1 HunterPro Precision Wheel Centering Kit**†
Hunter’s Precision Centering Kit provides the most precise and repeatable wheel centering on the broadest range of applications. The new high-performance flange plate and double-ended direct-fit collets enable accurate center mounting of the wheel and distortion-free clamping to the adaptor quickly, easily, and without damaging the wheel. (Storage not included)
Kit Includes:
A. 20-1845-1 Direct-Fit Collet Kit: Passenger Car/Light Truck
B. 20-1839-1 Adjustable Flange Plate and Stud Kit
|
|
|
|
20-1845-1 Direct-Fit Collet Kit: Passenger Car / Light Truck (up to 1/2 ton)
Range: 2.100"-3.525" (53 mm-90 mm)
Kit Includes:
A. 192-154-2 2.100"-2.325" (53 mm-59 mm)
B. 192-155-2 2.250"-2.475" (57 mm-63 mm)
C. 192-156-2 2.400"-2.625" (61 mm-67 mm)
D. 192-157-2 2.550"-2.775" (65 mm-70 mm)
E. 192-158-2 2.700"-2.925" (69 mm-74 mm)
F. 192-159-2 2.850"-3.075" (72 mm-78 mm)
G. 192-160-2 3.000"-3.225” (76 mm-82 mm)
H. 192-161-2 3.150"-3.375" (80 mm-86 mm)
I. 192-162-2 3.300"-3.525" (84 mm-90 mm)
J. 20-1930-1 Cone Selection Gauge
|
|
20-1846-1 Direct-Fit Collet Kit: 3/4 Ton / Import
Range: 3.450"-5.175" (91 mm-131 mm).
Kit Includes:
A. 192-163-2 3.450"-3.680" (88 mm-93 mm)
B. 192-164-2 3.600"-3.825" (91 mm-97 mm)
C. 192-167-2 3.750"-3.975" (95 mm-101 mm)
D. 192-168-2 3.900"-4.125" (99 mm-105 mm)
E. 192-169-2 4.050"-4.275" (103 mm-109 mm)
F. 20-1931-1 Cone Selection Gauge
G. 192-170-2 4.200"-4.425" (107 mm-112 mm)††
H. 192-172-2 4.500"-4.725" (114 mm-120 mm)††
I. 192-173-2 4.650"-4.875" (118 mm-124 mm)††
J.192-174-2 4.800"-5.025" (122 mm-128 mm)††
K.192-175-2 4.950"-5.175" (126 mm-131 mm)††
Optional Direct-Fit Collet 192-176-2 5.10" - 5.35"
** Patent Pending
† For CD Video demonstration request form 5096T.
††192-170-2 and larger collets must be used with spacer 46-433-2.
|
|
56-47-3 Trolley for Direct-Fit Collets, Flange Plates and Cone Storage
Provides organized storage and easy transportability to Direct-Fit collets, cones, flange plates and spacers.
|
|
20-1879-1 Collet Storage Rack Kit
Provides organized storage and easy accessibility for Direct-Fit collets on the GSP9710, GSP9610 and DSP9610 balancers.
(Shown with optional 67-676-1 Pin Storage Rack.) |
