|
175-353-1 Cup
4.5" Clamping Cup with notchless design fits aluminum wing nuts 76-371-3 and
76-373-3, forged steel wing nuts 76-432-1 and 76-433-1, QuickNut 76-438-2, and AutoClamp feature.
|
|
175-316-1 Cup
4.5" Clamping Cup with dual notched design fits recessed wheel bores on aluminum wheels and aluminum wing nuts 76-390-1, 76-371-3 and 76-373-3, forged steel wing nuts 76-432-1 and
76-433-1, QuickNut 76-438-2, and AutoClamp feature.
|
| |
|
175-217-1 Cup
4.75" Clamping Cup fits Quick Clamp Pro-Grip Kits and early cast iron GSP9700 wing nut
76-348-3.
|
|
175-159-1 Cup
4.5" Clamping Cup fits early DSP wing nut 76-255.
|
| |
|
106-82-2 Protector Sleeve
Fits all 4.5" cups to protect finished wheel surfaces when using a cup to clamp.
|
|
106-157-2 Protector Sleeve
Fits all 6" cups to protect finished wheel surfaces when using a cup to clamp.
|
| |
|
175-392-1 Cup
6" Clamping Cup fits
aluminum wing nut 76-390-1, forged steel wing nuts 76-432-1 and 76-433-1, QuickNut
76-438-2, and AutoClamp feature.
|
|
175-324-1 Cup with Sleeve
9.0" alloy wheel clamping cup with replaceable protector sleeve.
Kit Includes:
A. 175-296-2 Clamp Cup
B. 106-127-2 ALU Protective Sleeve |
|
46-433-2 Performance Wheel & Light-Truck Spacer
(7.89" O.D. x 5.25" I.D. x 1.5") Allows proper offset mounting of wide performance wheels. Achieves balance repeatability on many domestic 3/4- and 1-ton truck rims, including “duallies.”
Required for Dodge Viper rear wheels. Not compatible with the Extra Large Truck Cone, 192-92-2.
|
|
46-309-2 Extra Large Truck Cone Wheel Spacer
(8.00" O.D. x 6.30" I.D. x 1.53") For use when front-cone mounting Extra Large Truck Cone, 192-92-2. Not recommended for 16" and 16.5" “duallies” (see 46-433-2).
|
| |
|
46-320-2 Spacer
Polymer washer increases back cone centering pressure when back cone mounting wheel bore and extreme large end of the cone is used.
|
|
223-53-2 Pressure Ring
Fits early GSP and Quick Clamp Pro-Grip wing nuts. Protects metal-to-metal contact, significantly increasing clamping force.
|
| |
|
46-511-2 Small Wheel Spacer
Designed to use with wheels with small hubs such as a Mini Cooper. Reduces hub face inside diameter to 3.58".
|
|
76-379-2 Threaded Shaft Ring
Prevents cone or collet from sliding off the balancer shaft when removing assembly from the balancer. Not recommended unless same cone is used repeatedly.
|
| |
|
223-68-1 Pressure Ring
Fits both aluminum DSP and GSP wing nuts. Prevents metal-to-metal contact, significantly increasing clamping force.
|
|
175-379-2 Spacer Bushing
Porsche Cayenne alloy wheel mounting protector replaces the need to use a flange plate for front wheel protection while back cone mounting.
|
| |
| |
