Wheel Balancer Accessories

TruckChuck™ Wheel and Drum Kit For Hunter GSP and DSP Wheel Balancers
20-1602-1 TruckChuck™ Wheel and Drum Balancing Kit Three-Jaw Chuck Adaptor for factory steel and some aluminum wheels with centering holes from 3.13” to 7.13”. Offers the advantage of high centering accuracy and optimum balance repeatability combined with speed and ease of setup. Kit includes: A. 175-286-2 Three-Jaw Chuck Adaptor Shown with 20-1603-2 Jaw Kit. B. 20-1854-2 Heavy-Duty Extended Jaw Kit For wheels with centering holes from 5.13” to 9.13”. C. 175-296-2 Clamp Cup Shown with 106-127-2 ALU protective sleeve. Patent Pending.		The TruckChuck™ Balancing Kit is used on the mounting pad side of medium-duty, light-truck wheels.

Benefits of Using the TruckChuck™ Kit: Centering accuracy is not affected by the weight of wheel. Does not require lifting wheel while tightening wing nut. Mounting chuck inside offset “duallie” wheels helps support wheel vertically during clamping. Centering accuracy is dramatically improved with jaw contact at actual pilot diameter. Large range of pilot diameters are supported with a single adaptor. Balanced three-jaw chuck features a forged steel body, hardened bore, hardened jaw slides, hardened jaws and hardened gears. No spacer required in most applications. Installs with a 3/8” ratchet. See Form 4632T for complete operation instructions and additional mounting information.		The TruckChuck™ Balancing Kit allows the operator to easily mount and check large drums for imbalance.
Ordering Information For pricing and ordering information on Wheel Balancers or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

Also Available

Hunter Wheel Balancers

Click Here for Information

© Hunter Engineering Company