Hunter Engineering Company Logo
SEARCH:

Swing Air Jacks

Swing Air Jacks For Hunter Alignment Lift Racks

Three Capacities Available, Reliable, Fully Pneumatic Operation

Proven over decades of use, air-operated cylinders raise telescoping arms to contact either the suspension or frame. Three designs provide jacking capability for all Hunter alignment-lift racks.

  • Eliminates noise, oil leaks and frequent maintenance that develop on jacks with air-over-hydraulic components.
  • Safely lifts to 22” from runway surface with optional risers (18” lift standard). No need for stacking unstable blocks to increase lifting height.
  • Safe dual-handle operation-requires both control handles to be used to raise or lower the jack, keeping both hands clear during the lifting process.
  • Rolls easily on special rail to reach the vehicle manufacturer’s specified jacking points. Less affected by dirt and debris build-up than other jacks that roll in “gutters”.
  • Flip-up pads provide three levels of contact.

Swing Air Jacks

Swing Air Jacks
Dual-handle operation keeps technicians hands safely away from pinch points.
Three capacities to match every Hunter rack. The 8,000-lb. capacity three cylinder jack is designed to be used with Hunter 4-post and RMHD racks. The Hunter RX-12 scissor lift rack uses the 6,000-lb. capacity jack with two composite cylinders. The Hunter RX-9, D-Racks and RM model racks utilize the 4,500-lb. capacity jack and two composite cylinders for their lifting power.

NOTICE:

Product delivered to international markets may differ slightly in content to domestic product. Please consult your local distributor for details.

 8,000-lb. swing air jack
Swing the air jack up to the locked position to keep it out of the way when not in use. Swing Air Jacks have a very low profile when stored to prevent catching on low-clearance vehicles. 8,000-lb. swing air jack shown.
Swing Air Jack Specifications
Swing Air Jack, 4,500-lb. capacity
(Except on RX-9 lift racks)		 133–35–1
Swing Air Jack, 4,500-lb. capacity
(For use on RX-9 lift racks)		 133–67–1
Swing Air Jack, 6,000-lb. capacity 133–69–1
Swing Air Jack, 8,000-lb. capacity 133–62–1
Jack Pad (2 required) 64–50–2
Jack Riser Kit (2 included) 20–1403–1

Specs

Illustration of Jack Riser Kit. Adds 4” to lift. (20-1403-1)

Because of continuing technological advancements, specifications, models and options are subject to change without notice.

Ordering Information
For pricing and ordering information on Racks or other Hunter products, contact your local Hunter representative. See the representative locator or contact Hunter Engineering Company. To receive a quote on this equipment, go to Get-A-Quote.

Also Available

Hunter Alignment Systems

Click Here for Information
© Hunter Engineering Company