 |
Inflation Station inflates all 4 tires to correct pressure simultaneously – while you raise the lift or do other tasks! Save steps and save time! | |
 |
||
Pressure may be set on a per axle basis. All Inflation Station racks include PowerSlide locking slipplates. |
Inflation Station automatically detects being connected
and begins filling or bleeding one tire or all four,
depending on the preselected tire pressure. |
|
Each air hose is a flexible coil with a retaining clip on the chuck.
Storage is provided on the side of the lift for each tire position. |
||
|
Inflation Station allows you to save time by doing other things during the tire-filling process. Actual
|
||
 |
Save Steps While Doing a Better Job |
|
When combined with an FIA-equipped alignment console, set the desired pressure at either the lift or the alignment console. Inflation Station automatically records starting pressure and final pressure. This can be printed out as part of the final alignment printout.  When using work management on the alignment console, tire pressures (start and final) are stored along with other alignment data. |
||
|
Ordering Information
For pricing and ordering
information on Racks or other
Hunter products, contact your local Hunter representative. See the
representative locator
or contact Hunter Engineering
Company. To receive a quote on this equipment, go to Get-A-Quote. |
