|
|
|
Specifications and Ordering Information
Shown above: Standard configuration with four runway sections. |
Specifications |
- Max. vehicle gross weight:
20,000 lbs. (9,091 kg) per axle
- Drive-on height:
24 in. (610 mm)
- Runway width:
33 in. (839 mm)
- Overall width:
106 in. (2,693 mm)
- Distance between runways:
40 in. (1016 mm)
(Installed width may be varied)
- Overall length:
(Standard configuration) 403 in. (10,236 mm)
- Length of modular runways section:
46 in. (1169 mm)
- Approach ramp angle:
7.8º
- Power requirements:
220V, 1ph., 20A
|
|
The RKHD fits a wide range of vehicle applications.
|
Ordering Information |
Surface Mount
- RKHD, Includes pop-up ramps, turnplate sections and 4 runway sections.
- 20–1780–2, Pair of modular runway sections. Adds 46 in. to wheelbase capability.
|
|
Pit
- RKHD–P–24, Pair of turnplate sections for 24 in. pit.
- 20–1780–2, Pair of modular runway sections for 24 in. pit. Adds 46 in. to wheelbase capability.
- RKHD–P–30, Pair of turnplate sections for 30 in. pit.
- 20–1783–2, Pair of modular runway sections for 30 in. pit. Adds 46 in. to wheelbase capability.
- 20–1781–2, Pit adaptor secures runway to pit back wall.
|
Pit Configuration |
| 24 in. and 30 in. RKHD pit versions are available. This example shows 30 in. pit with three runway sections. |
|
 |
Options
- 25–24–1 Standard turnplates (two required)
- 25–139–1 Truck electronic turnplates (two required)
- 25–71–1 Audit turnplates (low friction, high durability) (two required)
- 20–1836–1 Jack Tray with rail kit
- 20–1838–1 Extra Rail Kit (order one for one with 20-1780-2 if RKHD is equipped with Jack Tray)
- 20–1837–1 Riser Kit (add to 20-1836-1 for 30 in. applications)
NOTICE:
Product delivered to international markets may differ slightly in content to domestic product. Please consult your local distributor for details.
Ordering Information
|
|
|
